Sprache
Normen für Faser-, Schicht- und Wabenverbundwerkstoffe
Prüfart | Norm | Beschreibung |
|---|---|---|
Tensile Test | ISO 527 - 4 | Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and anisotropic fibre-reinforced plastic composites |
Tensile Test | ISO 527 - 5 | Kunststoffe - Bestimmung der Zugeigenschaften - Teil 5: Prüfbedingungen für unidirektional faserverstärkte Kunststoffverbundwerkstoffe |
Tensile Test | ISO 4899 | Textile-glass-reinforced thermosetting plastics -- Properties and test methods |
Tensile Test | ISO 11566 | Carbon fibre -- Determination of the tensile properties of single-filament specimens |
Tensile Test | ASTM D 3039 | Tensile Properties of Polymer Matrix Composite Materials |
Tensile Test | ASTM D 4018 | Continuous Filament Carbon and Graphite Fiber Tows |
Tensile Test | ASTM D 3916 | Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod |
Tensile Test | ASTM D 5083 | Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens |
Tensile Test | ASTM D 7205 | Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars |
Tensile Test | DIN 65378 | Prüfung von unidirektionalen Laminaten; Zugversuch quer zur Faserrichtung |
Tensile Test | DIN 65469 | Faserverstärkte Kunststoffe; Zugversuch an einlagigen Zugflachprobekörpern Fibre-reinforced plastics; tensile test of monolayer flat tension specimens |
Tensile Test | EN 2561 | Unidirektionale Laminate - Zugprüfung parallel zur Faserrichtung Unidirectional laminates - Tensile test parallel to the fibre direction |
Tensile Test | EN 2597 | Unidirectional laminates - Tensile test perpendicular to the fibre direction |
Tensile Test | EN 2747 | Glass fibre reinforced plastics. Tensile test |
Tensile Test | prEN 6035 | Faserverstärkte Kunststoffe - Prüfverfahren; Bestimmung der Kerbzugfestigkeit an gekerbten und ungekerbten Probekörpern |
Tensile Test | DIN 29971 | Luft- und Raumfahrt; Unidirektionalgelege-Prepreg aus Kohlenstoffasern und Epoxidharz; Technische Lieferbedingungen |
Tensile Test | Airbus AITM 1.0007 | Faserverstärkte Kunststoffe - Bestimmung der Zugfestigkeit an ungekerbten, offen und geschlossen gekerbten Zugproben Fibre reinforced plastics: determination of notched, unnotched and filled hole tensile strength |
Tensile Test | Boeing BSS 7320 | Tensile Testing of Advanced Composites |
Tensile Test | SACMA SRM 4R-94 | Tensile Properties of Oriented Fiber-Resin Composites |
Tensile Test | SACMA SRM 9-94 | Tensile Properties of Oriented Cross-Plied Fiber-Resin Composites |
Tensile Test | TR 88012 CRAG Methods 300-303 | Tensile Testing |
Compression test | ISO 14126 | Faserverstärkte Kunststoffe - Bestimmung der Druckeigenschaften in der Laminatebene Fibre-reinforced plastic composites -- Determination of compressive properties in the in-plane direction |
Compression test | ISO 604 | Plastics -- Determination of compressive properties |
Compression test | ISO 8515 | Textile-glass-reinforced plastics -- Determination of compressive properties in the direction parallel to the plane of lamination |
Compression test | ISO 3597-3 | Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 3: Determination of compressive strength |
Compression test | ASTM D 3410 | Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading (IITRI - setup) |
Compression test | ASTM D 695 | Compressive Properties of Rigid Plastics |
Compression test | ASTM D 6641 | Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture |
Compression test | ASTM C 1358 | Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperatures |
Compression test | DIN 65375 | Prüfung von unidirektionalen Laminaten; Druckversuch quer zur Faserrichtung |
Compression test | DIN V 65380 | Prüfung von unidirektionalen Laminaten; Druckversuch parallel und quer zur Faserrichtung |
Compression test | prEN 2850 | Unidirektionale Laminate aus Kohlenstoffasern und Reaktionsharz - Druckversuch parallel zur Faserrichtung Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction |
Compression test | JIS K 7076 | Testing methods for compressive properties of carbon fibre reinforced plastics |
Compression test | AITM 1-0008 | Fibre Reinforced Plastics - Determination of Plain, Open Hole and Filled Hole Compression Strength. |
Compression test | Airbus QVA-Z10-46-38 | Bestimmung von Druckeigenschaften von CFK-Laminaten aus Gewebe-Prepreg, Prüfung in Kett- oder Schussrichtung |
Compression test | Boeing BSS 7260 - type III and IV | Advanced Composite Compression Tests |
Compression test | SACMA SRM 1R-94 | Compressive Properties of Oriented Fiber-Resin Composites |
Compression test | SACMA SRM 6-94 | Compressive Properties of Oriented Cross-Plied Fiber-Resin Composites |
Compression test | RAE-TR 88012 CRAG Method 400 | Method of test for longitudinal compression strength and modulus of unidirectional fibre reinforced plastics |
Compression test | RAE-TR 88012 CRAG Method 401 | Plain Compression |
Compression test | ISO 3597-3 | Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 3: Determination of compressive strength |
Compression after indentation | ASTM D 6264 | Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force |
Compression after Impact | ISO 18352 | Carbon-fibre-reinforced plastics -- Determination of compression-after-impact properties at a specified impact-energy level |
Compression after Impact | ASTM D 7137 | Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates |
Compression after Impact | prEN 6038 | Bestimmung der Restdruckfestigkeit nach Schlagbeanspruchung |
Compression after Impact | AITM 1.0010 | Determination of compression strength after impact-stress |
Compression after Impact | Boeing BSS 7260 - type II | Compression after impact |
Compression after Impact | CRAG method 403 | Compression after impact |
Compression after Impact | SACMA SRM 2R-94 | Compression after Impact Properties of Oriented Fibre-Resin Composites |
Compression after Impact | DIN 65561 | Prüfung von multidirektionalen Laminaten; Bestimmung der Druckfestigkeit nach Schlagbeanspruchung |
Compression after Impact | NASA RP 1092 ST-1 | Compression after Impact |
Open hole / Filled hole tensile | ASTM D 5766 | Open-Hole Tensile Strength of Polymer Matrix Composite Laminates |
Open hole / Filled hole tensile | ASTM D 6742 | Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates |
Open hole / Filled hole tensile | Airbus AITM 1.0007 | Faserverstärkte Kunststoffe - Bestimmung der Zugfestigkeit an ungekerbten, offen und geschlossen gekerbten Zugproben Fibre reinforced plastics: determination of notched, unnotched and filled hole tensile strength |
Open hole / Filled hole tensile | SACMA SRM 5-94 | Open Hole Tensile Properties of Advanced Composites Materials |
Open hole / Filled hole tensile | NASA RP 1092 ST-3 | Open hole tension |
Open hole / Filled hole compression | prEN 6036 | Bestimmung der Kerbdruckfestigkeit an gekerbten, ungekerbten und gebolzten Probekörpern |
Open hole / Filled hole compression | ASTM D 6484 (Boeing Document 888-10026, Boeing Document 6-83079-71) | Open-Hole Compressive Strength of Polymer Matrix Composite Laminates |
Open hole / Filled hole compression | ISO/DIS 12817 | Fiber-reinforces plastic composites - Determination of open-hole compression strength |
Open hole / Filled hole compression | Boeing BSS 7260 - Type 1 | Open Hole Compression Test |
Open hole / Filled hole compression | AITM 1-0008 | Fibre Reinforced Plastics - Determination of Plain, Open Hole and Filled Hole Compression Strength. |
Open hole / Filled hole compression | SACMA SRM 3R-94 | Open Hole Compression Properties |
Open hole / Filled hole compression | NASA RP 1092 ST-4 | Open hole compression |
Open hole / Filled hole compression | RAE-TR 88012 CRAG Method 402 | Open hole compression strength |
Open hole / Filled hole compression | Northrop NAI-1504C | Open Hole Compression Test Method |
Flexural tests | ISO 14125 | Fibre-reinforced plastic composites - Determination of flexural properties Faserverstärkte Kunststoffe - Bestimmung der Biegeeigenschaften |
Flexural tests | EN 2562 | Unidirectional laminates - Flexural tests parallel to the fibre direction |
Flexural tests | EN 2746 | Glass Fibre Reinforces Plastics - Flexural Tests, Three Point Bend Method |
Flexural tests | EN 13706-2 | Spezifikationen für pultrudierte Profile Teil 2: Prüfverfahren und allgemeine Anforderungen |
Flexural tests | ISO 3597-2 | Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 2: Determination of flexural strength |
Flexural tests | ASTM D 4476 | Flexural Properties of Fiber Reinforced Pultruded Plastic Rods |
Flexural tests | ASTM D 790 | Flexural Properties of Unreinforced and Reinforced Plastics and Eletrical Insulating Materials |
Flexural tests | ASTM D 6272 | Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending |
Flexural tests | ASTM D 7264 | Flexural Properties of Polymer Matrix Composite Materials |
Flexural tests | ASTM D 6415 | Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite1 |
Flexural tests | TR 88012 CRAG Method 200 | Flexural modulus and strength of reinforced plastics |
Flexural tests | HSR/EPM-D-003-93 | Four Point Flexural Testing of Composite Materials |
Flexural tests | DIN 53390 | BIEGEVERSUCH AN UNIDIREKTIONAL GLASFASERVERSTAERKTEN RUNDSTAB-LAMINATEN |
Interlaminar Shear Strength | ISO 14130 | Determination of apparent interlaminar shear strength by short beam-method |
Interlaminar Shear Strength | ISO 3597-4 | Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 4: Determination of apparent interlaminar shear strength |
Interlaminar Shear Strength | ASTM D 2344 | Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates |
Interlaminar Shear Strength | ASTM D 4475 | Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method |
Interlaminar Shear Strength | EN 2377 | Glasfaserverstärkte Kunststoffe; Prüfverfahren zur Bestimmung der scheinbaren interlaminaren Scherfestigkeit Glass fibre reinforced plastics; test method; determination of apparent interlaminar shear strength |
Interlaminar Shear Strength | EN 2563 | Kohlenstoffaserverstärkte Kunststoffe - Unidirektionale Laminate; Bestimmung der scheinbaren interlaminaren Scherfestigkeit Carbon fibre reinforced plastics - Unidirectional laminates; determination of apparent interlaminar shear strength |
Interlaminar Shear Strength | JIS K 7078 | Apparent Interlaminar Shear Strength of Carbon Fiber Reinforced Plastics by Three Point Loading Method |
Interlaminar Shear Strength | SACMA SRM 8-88 | Short Beam Shear Strength of Oriented Fiber-Resin Composites |
Interlaminar Shear Strength | CRAG method 100 | Interlaminar shear strength (ILSS) of reinforced plastics |
In-plane shear by Lap-Shear | EN 2243-1 | Structural Adhesives Test Methods Part 1 - Single Lap Shear, Aerospace Series |
In-plane shear by Lap-Shear | EN 2243-6 | Structural adhesives. Test methods. Part 6. Determination of shear stress and shear displacement |
In-plane shear by Lap-Shear | pr EN 6060 | Determination of the Tensile Single Lap Shear Strength |
In-plane shear by Lap-Shear | AITM 1-0019 | Determination of lap shear tensile strength of composite joints |
In-plane shear by Lap-Shear | Airbus QVA-Z10-46-09 | Determination of Interlaminar Tensile Shear Strength of Fiber Composite Structures |
In-plane shear by Lap-Shear | Airbus QVA-Z10-46-01 | Determination of the Bond Strength of Adhesives |
In-plane shear by Lap-Shear | DIN 65148 | Bestimmung der interlaminaren Scherfestigkeit im Zugversuch |
In-plane shear by Lap-Shear | ASTM D 3914 | In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod |
In-plane shear by Lap-Shear | ASTM D 3846 | Standard Test Method for In-Plane Shear Strength of Reinforced Plastics |
In-plane shear by Lap-Shear | CRAG method 102 | |
In-Plane Shear by ± 45° Laminates test | ISO 14129 | Bestimmung des Schermoduls und der Scherfestigkeit in der Lagenebene mit dem ± 45° Zugversuch |
In-Plane Shear by ± 45° Laminates test | prEN 6031 | Determination of in-plane shear properties (±45° tensile test) |
In-Plane Shear by ± 45° Laminates test | ASTM D 3518 | In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate |
In-Plane Shear by ± 45° Laminates test | DIN 65466 | Prüfung von unidirektionalen Laminaten; Bestimmung der Schubfestigkeit und des Schubmoduls im Zugversuch |
In-Plane Shear by ± 45° Laminates test | AITM 1-0002 | Determination of in-plane shear properties (±45° tensile test) |
In-Plane Shear by ± 45° Laminates test | Airbus QVA-Z10-46-22 | Bestimmung der Schubeigenschaften im Zugversuch von ± 45° CFKLaminaten aus unidirektionalem Prepreg (Tape) oder GewebePrepreg |
In-Plane Shear by ± 45° Laminates test | SACMA SRM 7-94 | Inplane Shear Properties (±45?) |
In-Plane Shear by ± 45° Laminates test | RAE TR 88012 CRAG Method 101 | In-plane shear |
In-Plane Shear by ± 45° Laminates test | JIS K 7079 | In-Plane Shear Properties of Carbon Fiber Reinforced Plastics by Plus or Minus 45 Degrees Tension Method and Two Pairs of Rails Method |
In-Plane Shear by ± 45° Laminates test | ASTM D 3044 | Shear Modulus of Wood-Based Structural Panels |
In-Plane Shear by plate twist method | ISO/CD 15310 | Fibre-reinforced plastic composites -- Determination of the in-plane shear modulus by the plate twist method |
Specific Shear Tests | ASTM D 4255 | In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method |
Specific Shear Tests | ASTM D 5379 | Shear Properties of Composite Materials by the V-Notched Beam Method (Iosipescu) |
Specific Shear Tests | ASTM D 7078 | Shear Properties of Composite Materials by V-Notched Rail Shear Method |
Specific Shear Tests | ISO 15310 | Fibre-reinforced plastic composites -- Determination of the in-plane shear modulus by the plate twist method |
Specific Shear Tests | DIN 53399-2 | Testing of reinforced plastics; shear test on plane specimens Prüfung von faserverstärkten Kunststoffen; Schubversuch an ebenen Probekörpern |
Fracture mechanics | ISO 13586 | Plastics -- Determination of fracture toughness (GIC and KIC) -- Linear elastic fracture mechanics (LEFM) approach |
Fracture mechanics | ISO 15024 | Fibre-reinforced plastic composites -- Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials |
Fracture mechanics | ISO 17281 | Plastics -- Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s) |
Fracture mechanics | ISO/CD 15114 | Fibre-reinforced plastic composites -- Determination of apparent mode II interlaminar fracture toughness for unidirectionally reinforced materials |
Fracture mechanics | ESIS TC 4 | Protocol for interlaminar fracture testing of composites |
Fracture mechanics | pr EN 6033 | Draft Document - Aerospace series - Carbon fibre reinforced plastics - Test method; determination of interlaminar fracture toughness energy; mode I, GIC |
Fracture mechanics | prEN 6034 | Draft Document - Aerospace series - Carbon fibre reinforced plastics - Test method; determination of interlaminar fracture toughness energy; mode II, G<(Index)IIC> |
Fracture mechanics | ASTM D 5045 | Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials |
Fracture mechanics | ASTM D 5528 | Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
Fracture mechanics | ASTM D 6068 | Determining J-R Curves of Plastic Materials |
Fracture mechanics | ASTM D 6671 | Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites |
Fracture mechanics | ASTM WK22949 | New Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites Using the End-Notched Flexure (ENF) Test |
Fracture mechanics | ASTM E 1922 | Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials |
Fracture mechanics | CRAG method 600 | Method of Test for Interlaminar Fracture Toughness of Fibre Reinforced Composites |
Fracture mechanics | AITM 1.0005 | Determination of interlaminar fracture toughness energy. Mode I. |
Fracture mechanics | AITM 1.0053 | Determination of fracture toughness energy of bonded joints, Mode I, GIC |
Fracture mechanics | AITM 1.0006 | Determination of interlaminar fracture toughness energy. Mode II |
Fracture mechanics | Boeing BSS 7273 | |
Fracture mechanics | Boeing BMS 8-276 | |
Fracture mechanics | NASA method RP 1092 ST-5 | Hinged double cantilever beam |
Fracture mechanics | DIN 65563 | |
Thin wall Cylinder | ASTM D 5448 | In-Plane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders |
Thin wall Cylinder | ASTM D 5449 | Transverse Compressive Properties of Hoop Wound Polymer Matrix Cylinders |
Thin wall Cylinder | ASTM D 5450 | Transverse Tensile Properties of Hoop Wound Polymer Matrix Cylinders |
Lochleibung / Verbindungselemente | ASTM D 5961 | Bearing Response of Polymer Matrix Composite Laminates |
Lochleibung / Verbindungselemente | ASTM D953-02 | Bearing strength |
Lochleibung / Verbindungselemente | ISO/DIS 12815 | Fibre-reinforced plastic composites - Determination of plain-pin bearing strength |
Lochleibung / Verbindungselemente | DIN 65562 | Bestimmung der Lochleibungsfestigkeit |
Lochleibung / Verbindungselemente | pr EN 6037 | Bearing strength |
Lochleibung / Verbindungselemente | EN 13706-2 | Spezifikationen für pultrudierte Profile Teil 2: Prüfverfahren und allgemeine Anforderungen |
Lochleibung / Verbindungselemente | AITM 1-0009 | Determination of Bearing Strength by either Pin or Bolt Bearing Configuration. Faserverstärkte Kunststoffe; Bestimmung der Lochleibungsfestigkeit mit einer Stift oder Schraubenversuchsanordnung |
Lochleibung / Verbindungselemente | AITM 1-0065 | Fiber reinforced plastics-Determination of joint strength of mechanically fastened joints |
Lochleibung / Verbindungselemente | TR 88012 CRAG Method 700 | Bearing strength |
Lochleibung / Verbindungselemente | SACMA SRM 9-89 | Bearing Strength Properties of Oriented Fiber-Resin Composites |
Lochleibung / Verbindungselemente | ASTM D 7248 | Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens |
Pull tests | ASTM D 7332 | Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite |
Pull tests | ASTM D 7522 | Pull-Off Strength for FRP Bonded to Concrete Substrate |
Fatigue | ISO 13003 | Fibre-reinforced plastics -- Determination of fatigue properties under cyclic loading conditions |
Fatigue | ASTM D 3479 | Tension-Tension Fatigue of Advanced Composites |
Fatigue | ASTM D 6873 | Bearing Fatigue Response of Polymer Matrix Composite Laminates |
Fatigue | ASTM D 671 | Flexural Fatigue of Plastics |
Fatigue | HSR/EPM-D-002-93 | Tension-Tension Load Controlled Fatigue Testing of Composite Materials Thermal Mechanical Fatigue (TFM) |
Zug | ASTM C297 | Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions |
Zug | AITM 1-0025 | Flatwise tensile test of composite sandwich panel |
Zug | prEN 6062 | Fibre Reinforced plastics- Test method- Flatwise tensile test of composite sandwich panel. |
Druck | ASTM C365 | Flatwise Compressive Strength of Honeycombs |
Druck | ASTM D351 | Edge Strength of Honeycombs |
Druck | ASTM D 5467 | Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam |
Scher | ASTM C273 | Core Shear of Sandwich Honeycombs |
Scher | Airbus QVA-Z10-46-06 | Determination of the Shear Strength of Joint Adhesives in Shear Test of Pipes |
Scher | DIN 53294 | Kernverbunde, Schubversuch |
Biege | ASTM C393 | Flexural Properties of Sandwich Honeycombs |
Biege | DIN 53293 | Biegeversuch |
Biege | AITM 1.0018 | Sandwich flexural test - 4 point bending |
Peel | ASTM D1781 | Climbing Drum Peel |
Peel | ASTM D1876 | T-Peel Test |
Peel | ASTM D3167 | Floating Roller Peel |
Peel | Airbus QVA-Z10-46-05 | Determination of Drum Peeling Force of Adhesives and Adhesive Prepregs During Drum Peeling Test |
Peel | Airbus QVA-Z10-46-03 | Determination of the Peel Strength of Adhesives in Floating Roller Peel Tests (Bell) |
Fatigue | ASTM C394 | Standard Test Method for Shear Fatigue of Sandwich Core Materials |
PRESSEMITTEILUNGEN
